Big Area Additive Manufacturing Product Overview
We are writing history with the rollout of the first Big Area Additive Manufacturing (BAAM) system, taking 3D printing to a large, industrial scale. In this video you will see an overview of this groundbreaking product. Learn more about our BAAM machine.
3D PRINTED SUBMARINE
The Navy teamed up with Oak Ridge National Laboratory to print the military's first 3D-printed submarine hull.
3D PRINTED EXCAVATOR CAB
BAAM was used to 3D print the cab of a functioning excavator revealed at CONEXPO 2017.
3D PRINTED ORION SPACECRAFT REPLICA
This is a replica of the Orion Spacecraft that was 3D printed on our BAAM machine. It was on display at the 2016 Rapid Expo.
3D Printed Shelby Cobra
This is a replica of a Shelby Cobra that was 3D printed on our BAAM machine. It was placed on display at the 2015 Fabtech show.
3D Printed F-22 Raptor
This is a replica of an F-22 Raptor that was 3D printed on our BAAM machine. It was placed on display at the 2015 Fabtech show.
3D Printed PUV
Oak Ridge National Labs utilized our BAAM machine to 3D print a Utility Vehicle and a house. The Printed Utility Vehicle (PUV) was placed on display at the 2015 Fabtech show.
3D Printed Kayak
This kayak that was 3D printed on our BAAM machine. It was placed on display at the 2015 Fabtech show.
Oak Ridge National Labs Signs Agreement with Cincinnati Incorporated
DOE's Oak Ridge National Lab signed an agreement Monday, Feb. 17, 2014 with Cincinnati Incorporated to develop a large-scale polymer additive manufacturing (3-D printing) system. (Video by Michael Patrick/News Sentinel)
BAAM and CINCINNATI Success Story from the Department of Energy (DOE)
The Department of Energy (DOE) is a key funding source for Oak Ridge National Labs (ORNL) , CINCINNATI's partner for BAAM development. This video outlines the history and progress of CINCINNATI with the evolving partnership of ORNL and the DOE.
3D Printed Shebly Cobra at Auto Show
ORNL's newly printed 3D Shelby Cobra was showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument.
Strati at IMTS 2014
History was made in front of over 100,000 attendees at IMTS 2014 when Cincinnati Incorporated appeared in it's first trade show in over 60 years and printed the major components of the world's first 3D printed car. In collaboration with partners, Oak Ridge National Labs, The Department of Energy, and Local Motors, Cincinnati Incorporated's BAAM Machine (Big Area Additive Manufacturing) was featured in the AMT - The Association For Manufacturing Technology Emerging Technology Center.
CI SAAM HT Unveiled at Fabtech 2018
During Fabtech 2018, Cincinnati Incorporated unveiled the new addition to their additive line, SAAM HT. SAAM HT (High Temperature) offers the most affordable solution to fabricate parts in 3D printing’s most advanced thermoplastics and composites. SAAM HT 3D prints in ULTEM, PEEK, polycarbonate, and any thermoplastic up to 450°C.
Programming SAAM with NVCloud
In this video, you will learn how to program SAAM with the NVCloud software.
3D PRINTED SHELBY COBRA
Time-lapse video of SAAM 3d printing a replica of BAAM's printed Shelby Cobra. It took approximately 2 hours to complete with 25 grams of plastic.
We are one of a handful of U.S.-based, build-to-order machine tool manufacturers, and have shipped more than 50,000 machines in 100 years of operation. From our modern 500,000-square-foot plant and technical center on an 80 acre campus near Cincinnati, Ohio, we engineer and build our machines to the standard of ruggedness required in the North American market – with premium engineering features that stand up to years of rigorous use in demanding environments.