|
| Parts Maker Presses |
|
|
|
Mechanical Press
|
| Mechanical presses are famous for their high production rates and part making accuracy. The all steel welded construction uses a tie rod design to provide a rigid robust press structure required for precision part production. An AC Variable Frequency main drive motor provides power to double reduction gearing contained in a fully enclosed crown located above the die area to keep powder out of critical drive mechanisms. All drive mechanisms are lubricated through a double filtered pressurized recirculation oil system to ensure long reliable service under demanding conditions. |
| |
| Withdrawal Press Motion |
Withdrawal press motion permits start of the fill function earlier in the press
cycle than other types of press motion. It also reduces potential for air
entrapment and causes the least disruption of the powder during entry into
the die cavity. This optimizes the press cycle and helps ensure production
of high quality consistent parts.
|
| |
|
Removable Die Set |
|
The press frame is designed to accept a removable die set
to allow
removal for maintenance or complete replacement. This reduces maintenance
costs and permits changing of die set configurations without extensive press
modifications.
|
| |
|
Precision Common Guiding |
|
Absolute guiding is achieved for Top Punch Plate and Die Platen through the use of
common guiding. With absolute platen alignment, tooling lasts longer, maintenance
is minimized and higher quality precision parts can be produced.
|
| |
|
Multi-Level Capability
|
|
With available options, Parts Maker Presses can be configured to produce
multi-level parts using the following independently controlled part making tools:
|
| |
 |
Inner Upper Punch |
| |
|
Outer Upper Punch |
| |
|
Shelf Die or Straight Die |
| |
|
Stationary Punch |
| |
|
Through, Stepped or Blind Core Rod |
|
| |
| CINCINNATI Press Control Center |
| Fingertip programmable computer control of press functions is provided by the Press Control Center designed and built by CINCINNATI . The combination of Menu Driven Software and Softkey Technology simplify set-up and operation to reduce operator effort and ensure proper production of repeat production lots. |
| |
 |
| |
| Programmable Feeder System |
|
CINCINNATI has been the leader in development of programmable controlled powder
feeder systems. Operators have complete control over all critical powder feed
shoe motions though the Press Control Center combined with an AC servo motor
driven ball screw feeder drive. Good parts begin with consistent filling of the
die cavity. The Parts Maker Programmable Feeder combination allows optimized part
quality at the high production rates needed to be competitive now and in the
future. |
| |
|
Extensive Support Services |
|
CINCINNATI provides an extensive list of comprehensive support services with each new press to ensure many years of productive profitable service. |
| |
| |
Lasers
