|
| Rigid Reflex Presses |
|
|
|
Mechanical Press
|
| Mechanical presses are famous for their high production rates and part making accuracy. The all steel welded construction uses a tie rod design to provide a rigid robust press structure required for precision part production. An AC Variable Frequency main drive motor provides power to double reduction gearing contained in a fully enclosed crown located above the die area to keep powder out of critical drive mechanisms. All drive mechanisms are lubricated through a double filtered pressurized recirculation oil system to ensure long reliable service under demanding conditions. |
| |
| Withdrawal Press Motion |
|
Withdrawal press motion permits start of the fill function earlier in the press
cycle than other types of press motion. It also reduces potential for air
entrapment and causes the least disruption of the powder during entry into
the die cavity. This optimizes the press cycle and helps ensure production
of high quality consistent parts.
|
| |
|
Rugged Precision Guiding |
|
The main pressing ram is guided by a large diameter bearing and outboard guiding using long bearing husks running on the outboard guide rods. The platens are guided by long bearing husks running on large diameter guide rods that span from the crown to the bed of the press. This combination provides a rigid robust guiding system required to produce precision complex parts using close tooling tolerances.
|
| |
|
Multi-Level Capability |
|
With available options, Parts Maker Presses can be configured to produce
multi-level parts using the following independently controlled part making
tools:
|
|
|
|
| |
 |
Inner Upper Punch |
| |
|
Middle Upper Punch |
| |
|
Outer Upper Punch |
| |
|
Shelf Die or Straight Die |
| |
|
Middle Platen Punch |
| |
|
Bottom Platen Punch |
| |
|
Stationary Punch |
| |
|
Through, Stepped or Blind Core Rod |
|
| |
|
CINCINNATI CNC Compact Computer Control Center
|
|
Fingertip programmable computer control of press functions is provided by the
CINCINNATI CNC Compact Computer Control Center . The combination of Menu Driven
Software and Softkey Technology simplify set-up and operation to reduce operator
effort and ensure proper production of repeat production lots. Color graphics
display operator oriented information to effectively highlight critical part
making functions. This powerful control was specifically designed for
CINCINNATI PM presses and provides a full range of press control, monitoring and
data collection features.
|
| |
 |
| |
|
Programmable Feeder System
|
|
CINCINNATI has been the leader in development of programmable controlled powder
feeder systems. Operators have complete control over all critical powder feed shoe
motions though the Press Control Center combined with an AC servo motor driven
ball screw feeder drive. Good parts begin with consistent filling of the die
cavity. The Parts Maker Programmable Feeder combination allows optimized part
quality at the high production rates needed to be competitive now and in the
future. |
| |
|
Extensive Support Services |
|
CINCINNATI provides an extensive list of comprehensive support services with
each new press to ensure many years of productive profitable service.
|
| |
| |
Lasers
