|
| Power Die Change Press |
|
|
|
Hybrid Press Design
|
|
The CINCINNATI Power Die Change Compacting Press combines the speed and accuracy of
a mechanical press with the controllability of a hydraulic press. This unique
combination is the solution for lean manufacturing pressing requirements of complex
precision PM parts. |
| |
 |
| |
|
Multi-Level Part Capability |
|
Complex PM parts with up to 8 levels can be produced on a CINCINNATI
Power Die Change Compacting press using the following independent
tooling levels:
|
|
| |
 |
Outer Upper Punch |
| |
|
Middle Platen Punch |
| |
|
Inner Upper Punch |
| |
|
Shelf or Straight Through Die |
| |
|
Outer Lower Punch |
| |
|
Middle Lower Punch |
| |
|
Inner Lower Punch |
| |
|
Through, Stepped or Blind Core Rod |
|
| |
 |
| |
|
Unique "Tri-Press Stops" |
|
Outer and Middle Lower Punches are supported on "Tri-Press Stops" to facilitate
production of complex parts that generate off-center loading. The combination of
three press stops per platen and robust guiding ensure production of precise parts
using tight tolerance tooling. |
| |
 |
| |
|
CINCINNATI Compact CNC Computer Control Center
|
|
Operator-oriented fingertip programming control is provided to simplify press
set-up and operation. This powerful control not only provides basic control
of the press, but also performs extensive press and process monitoring.
With available options, it can make on-the-fly process changes to reduce
part-to-part variability within a production run.
|
| |
 |
| |
|
CNC Platen Motion Control
|
|
Critical Platen motions are established by generation of a Desired Motion
Trace using basic part information. The color display indicates the programmed
and actual traces of each lower tooling member. This speeds part development
and facilitates part problem identification.
|
| |
 |
| |
|
Power Operated Die Set Transfer System
|
|
Die Sets are exchanged in a matter of minutes using the power operated die set
transfer system. Each die set maintains full time utility connections to speed
exchange and provide a means to simulate press motion during tooling set-up.
A power-operated hoist is provided to assist tooling installation/removal and
is large enough to use for major die set repairs if necessary. A moving floor
system increases operator access during tool changes and keeps unwanted debris
out of the press pit. |
| |
| |
Lasers
