BendSim Software 5.4.0.6
Full installation package of version 5.4.0.6 (Released May 2023).
EM-503: Offline BendSim Module Software Manual
The software is fully functional, however, if you have not purchased the software after 60 days it will expire.
Note: It is recommended that the software versions of your press brake controls match the version in this download. You may wish, however, to use this version against that recommendation. If you discover that this new version is incompatible with your existing press brakes, please call the Cincinnati Service Department at (513) 367-7100 to schedule compatibility upgrade service for your machines (or assistance in re-establishing the previous offline software version)
HASP & HARDLOCK DRIVERS
This area contains the most recent version of the HASP & Hardlock copy protection key drivers.
NOTE: The single user Hardlock device will not work with Windows Vista or Windows 7, they will only work on computers running Windows XP and older operating systems. If you have an old hardlock device and you want to upgrade to a new computer running Windows Vista or Windows 7, you will need to contact the CINCINNATI Parts Department to purchase a HASP device. If you are unsure which lock you have, the USB Hardlock is about 2" long, blue and will say "Hardlock" on it. The USB Hasp is about 1" long, green, and will say "Hasp HL" on it.
-
Refer to the Readme file included in the package for details.
Important: Upgrading Sentinel LDK Run-time Environment to version 8.21 or later migrates existing SL-AdminMode and SL-Legacy licenses to a new secure storage. Once this occurs, you cannot downgrade the Run-time Environment to an earlier version. Downgrading the Run-time Environment will make existing SL-AdminMode and SL-Legacy licenses invalid.
-
Latest version of Hardlock and HASP device drivers (Version 8.43). This driver works with both the HASP and Hardlock devices.
-
Hardlock Server software version 4.60. Supports USB Server Hardlocks. This software should only be installed on a computer that has a network Hardlock installed.
-
HASP Server software. Supports USB Server HASP's. This software should only be installed on a computer that has a network HASP installed.
Note: The network HASP software requires that port 475 be open for both TCP and UDP traffic on the client and server computers. Any firewalls in use must be configured to allow port 475 traffic.
-
Network HASP configuration file. This file can be edited with the actual server IP address and placed in the client's application directory. This is usually only necessary if the client computer and server computer are located on different subnets.
-
Hardlock/HASP diagnostic program. This file installs the Aladdin DiagnostiX program to help diagnose Hardlock and HASP problems.
-
CINCINNATI can assist in troubleshooting your machine through the use of TeamViewer. This software allows our support group to remotely access your control so we can better understand any problems that are occurring.
No installation required, just download and run.
- For Windows XP, Embedded Standard and older, download version 12 from this link: TeamViewerQSv12 →
- For Windows 8 Embedded and Windows IOT, the latest version can be downloaded here: TeamviewerQSv15 →